Wedge Action Grips; Rated Capacity: 100 kN
2736-004 | Wedge Action Grips; Rated Capacity: 100 kN
High Temperature Wedge Action Grips, Capacity: 100 kN (20,000 lb, 10,000 kg).
Stainless steel
Temperature range: -73 °C. to 315 °C. (-100 °F to 600°F)
Maximum specimen size is face determined
Upper and lower fittings: Type Dm (1.25 in connection with 1/2 in clevis pin)
Requires 25 mm wide (1 in.) faces
Ring handles
| Accessory Weight | 9 kg (20 lb ) |
|---|---|
| Capacity | 100 kN (22,500 lbf ) |
| Lower Fitting | 0.5 in clevis pin (Type Dm) |
| Notes | For 25 mm (1 in) wide faces |
| Temperature Rating | -73 to +315 °C (-100 to +600 °F ) |
| Upper Effective Length | 230 mm (9 in ) |
| Upper Fitting | 0.5 in clevis pin (Type Dm) |
- Jaw Faces for Flats (Coarse Serrated, 0 to 6.4 mm)
- Jaw Faces for Flats (Fine Serrated, 0 to 6.4 mm)
- Jaw Faces for Flats (Coarse Serrated, 6.4 to 12.6 mm)
- Jaw Faces for Flats (Fine Serrated, 6.4 to 12.6 mm)
- Jaw Faces for Rounds (Coarse Threaded, 12 to 16 mm)
- Jaw Faces for Rounds (Coarse Threaded, 16 to 19 mm)
- Jaw Faces for Rounds (Fine V-Serrated, 3.5 to 8 mm)
- Jaw Faces for Rounds (Coarse V-Serrated, 7 to 12.7 mm)
- Jaw Faces for Rounds (Fine V-Serrated, 7 to 12.7 mm)
- Jaw Faces for Rounds (Fine V-Serrated, 12.7 to 19 mm)
2736 004 005 Series High-Temperature Manual Wedge Action Grips
Manual Wedge Action Grips are designed for easy specimen loading, alignment, and positioning. After initial face-to-specimen contact, the gripping force increases as the testing load increases. Virtually no pre-load is seen during specimen clamping due to the design of the moving grip bodies. This makes them particularly suitable for testing high-strength materials, such as metals and composites, ensuring that specimen slippage is eliminated. A ring handle is provided to operate the grip from the front of the chamber. This makes it very practical for an operator that is wearing proper gloves when testing under hot or cryogenic conditions.
- Prodotti
- 10/24/2015
- 0.7 MB